Pluggy Lock - Twist...and GO!
Pluggy Lock - Twist...and GO!

Rick Broida (CNET): "I must admit I'm impressed with this product."

Aviva Gat (GEEKTIME): "There doesen't seem to be similar products available."

Michael Cheng (LIFEHACK): "...essential tool for individuals who are always on the go."



 Unfortunately all of us at least once have dropped, lost or, just do not know where to leave their smartphone

 The industry has tried to solve the problem by proposing systems of all shapes and sizes trying to hook the device to your neck, tied to your belt or arm etc etc. 

 At the moment all of these products, however, are not efficient from both a technical and aesthetic point of view. 

 Every device is different, therefore, a good system for a specific model is not necessarily valid for another.


 We have been thinking of a universal system that would allow to achieve a firm link to the device, non-invasive and especially nice to see.


 After some attempts, we managed to develop a outstanding, unique and universal system, the PLUGGY-LOCK. 

This is a patented system that allows us to hook our smartphones or tablets to:

  • Lanyard
  • Key chains
  • Pendants
  • Touch pens
  • Bags

Using your imagination, you can also find other ways to use this incredible innovation...






 In particular, PLUGGY-LOCK's shape allows it to anchor onto a special magnetic base called “SELFIE-DOCK”,  designed and created for it.

It can be used for:

  • Selfie application
  • Stop motion application
  • Videoconference
  • Watch videos
  • Anchor your device to steel surfaces





 All components of the PLUGGY-LOCK are designed to make it compact and functional, and above all unique.

Pluggy’s oval shape reminds us of aeronautical structures and the CAP​​, that looks like a time-capsule, works with magnetic retention!

This makes the PLUGGY-LOCK a cool gadget you can’t do without.

We also thought of giving pluggy a color thus integrating it better to  your smartphone.






 It is very simple to use: the PLUGGY-LOCK fits into the headphone hole and all you have to do is screw it in.

Just a couple of turns and pluggy is firmly in!



 The component that holds the PLUGGY-LOCK to the device is the rubber element in the center. It is deformed into the earphone jack when the pluggy is screwed; on the contrary it returns to its original shape when the pluggy is unscrewed.  

We have patented this system to make it exclusive for PLUGGY-LOCK.





Tests in laboratory have shown an effort of about 7 lbs [3.2 Kg] to take a PLUGGY-LOCK out of the headphone hole of an Apple iPhone

 To remove this great product just unscrew counterclockwise the pluggy, pull as if you would remove the headphone hole and put it in its MAGNETIC CAP.



 PLUGGY-LOCK is compatible with Apple iPhone and iPad (all models), Android Phones,  Nokia Phones, BlackBerry, Tablets and all devices equipped with a 3,5mm headphone hole  (Nintendo DS, Sony PSP, etc).



 After careful analysis we made a few prototypes of PLUGGY-LOCK in our garage and distributed them to our best friends to test them on their smartphones.

After 2 months the testing phase  gave us great results, awarding us the final version of PLUGGY-LOCK that we would like to produce. 


 The quality of the final product is very important for us, so we have already identified and contacted the best companies that will produce the PLUGGY-LOCK for us, trying to obtain the best price in order to make it accessible to everyone. 

The cost of each pluggy is low but the minimum order quantity makes it difficult for us on our own. 

For this reason we are asking for your help to make pluggy  available to everyone.



  • 2013 Oct 10 | The idea PLUGGY-LOCK is born.
  • Oct 11 - Nov 5 | We built the first prototypes tested on Apple iPhone, Samsung Galaxy and Nokia Lumia.
  • Nov 6 - Nov 23 | We presented the documents for the patent. 
  • Nov 24 - 2014 Jan 31 | PLUGGY-LOCK is tested.
  • Feb 1 - Mar 24  | We contacted suppliers for the production of PLUGGY-LOCK.
  • Apr 16 - Jun 25 | We started here on kickstarter.
  • Jun 30 - Aug 22 | We will start the production of PLUGGY-LOCK.
  • Aug 25 - Sep 05 | Quality control and assembly. 
  • Sep 08 | We’ll send the product.
comments powered by Disqus