Flikframe - Picture frames that don't mess up your walls.
Flikframe - Picture frames that don't mess up your walls.

This project has already launched.

 

 Pictures, hang them on the wall, and it will immediately transform any space to become warm, personal and full of life. However, you don’t always get to hang pictures on the wall.

Because you’re renting, your landlord will not tolerate damages to the walls. 

Or, it’s hard to put a nail in a concrete wall. 

Or, you don’t have the right tools. 

Or, you just don't want holes on your new walls (that's me!)

Pop up to sticks on the wall with sticky tack, holds on the wall with magnets, folds down flat to pack away. 
Pop up to sticks on the wall with sticky tack, holds on the wall with magnets, folds down flat to pack away.

 

Made out of 100% recycled boxboard, uses magnet for quick snap onto walls. 
Made out of 100% recycled boxboard, uses magnet for quick snap onto walls.

  

 

 

 

Flikframe is for apartment-renters, because we understand blank walls are dry & boring.

Flikframe is for illustrators, photographers, and artists. Sell your works readily framed, with a wall-friendly picture frame.

Flikframe is for those who don't have all the tools needed, to create a mistake-free photo wall.

Flikframe is for the trendy, you have marble phone case & rose gold paperclips, what you need now are matching picture frames.

Flikframe is for the family, your photo gallery wall needs to grow as your family grows.

 

 

 

Putting together your Flikframe is quick and simple.

Take your Flikframe out of the package, carefully stick the two main body pieces together. Sandwich your picture in between the acrylic and picture backing, slip it under the elastic and it will be held securely in place. Lastly, fold the sides in, and have the magnetic wall plate hold the frame in the propped-up position.

 

 

 

Hanging Flikframe on the wall is even easier, place adhesive (Blu-tack, gel pad, removable tape etc) on the four corners of the magnetic wall plate, and press it firmly on the wall where you want the picture to be. 

Then, just snap the Flikframe on the wall and you’re done!

 

 

 

We chose the recycled boxboard as our main material for Flikframe. Not only is this material sturdy and lightweight, it has minimal impact on our environment.

Rare earth magnets are being used to hold Flikframe together, and secure it onto the wall plate. These magnets are often used in toys & packaging.

Acrylic is used instead of glass or PVC. Acrylics are much lighter than glass, unlikely to shatter in case of a fall, and has 92% light transmission (glass windows are 83-90%).

 

 

 

 

Flikframe resembles the Apple product packaging in many ways. They are sleek, strong, and the satin finish gives it a beautiful subtle sheen.

A 90 degrees V-groove carved on the inside, presents a perfectly sharp 90 degrees edge on the outside. That is why Flikframe look so sleek, because we sweat the small things. 

 

 

 

To elevate the styling of a room, a simple solution is to display picture on the wall, inside of a thick, solid picture frame. These frames are generally quite weighty, which means you would need a nail, or a strong adhesive hook.

Flikframes are about 30% lighter than the same size standard MDF picture frames, and comes with more volume & depth. The magnetic wall plate means you get a large contact surface with the wall, making it easier to use your choice of removable adhesives (Blu-tack, Fixate gel pad, removable double-sided tapes...etc).

 

When flattened, Flikframe is only 8mm, and 25mm in depth when fully assembled.

Your pictures will have a elevated display, well exhibited by a thick and (appears to be) solid frame. When you need to move, Flikframe quickly flattens down, so it is easy to transport them to where you're going, and quickly props back up.

 

 

 

 

 

Ever thought your picture will look better framed in a different style? You’re probably right.

Flikframe Jacket is the quickest and easiest way to stylize your picture frame, just fold along the crease line, and it's ready-to-wear!

 

Flikframe jackets are made out of printed pre-cut cards. Fold along the scorch lines, and wrap it onto the frame as per instruction.

Paper is a very versatile medium, it can be printed, embossed, UV spotted, gold foiled or diecut. We are aiming to develop more ways to dress up your frame, using these modern printing technologies. Or better yet, to be able to collaborate with artists to create picture + jacket sets!

 

 

 

There are many exciting things ahead planned for Flikframe!

First, we are aiming to provide more sizes, especially bigger frames, so you can fill up your empty walls faster!

Having a hard time visualizing a good gallery wall layout? We will be developing an online gallery wall designer. Drag-n-drop pictures, rotate frames, change Flikframe Jackets and print out your plans!

Additionally, we would start collaborating with designers and illustrators, to create new Flikframe Jackets - that matches their work. Blank walls are the greatest canvas in a room, and we would love to make it look beautiful!

 

 

Flikframe currently has 3 different sizes - 5"x5", 5"x7" & A4, and comes in black or white. 
Flikframe currently has 3 different sizes - 5"x5", 5"x7" & A4, and comes in black or white.

 

 

Put a jacket on it - Flikframe Jackets.

Just add $3 for each Flikframe Jacket to match your Flikframe. 
Just add $3 for each Flikframe Jacket to match your Flikframe.

 

Choose from these 6 styles of Flikframe Jackets (Choose later) 
Choose from these 6 styles of Flikframe Jackets (Choose later)

 

 

 

 

 

 

Flikframe is created by Jolene & Long, a couple of designers enjoying family life in Sydney Australia.

Together, Jolene & Long has been designers for over 2 decades. Their experiences range from graphics design, branding, digital, UI/UX, motion... the list goes on. Now, Long is an Art Director, and Jolene is a mother/designer/cook/cleaner/kids entertainer.

Being designers, we love to feast our eyes on beautiful visuals, and wanted to introduce more of them in our home. That is why we developed Flikframe, we wanted to have the freedom to hang more pictures on our walls.

 
comments powered by Disqus